This is a book I cut out for my daughter to give to a few good friends of hers. Word books are a challenge for a lot of people, but once you've get one put together, you will realize that they really aren't that tough - especially if you use a file that has been shared by another designer! There are LOTS of videos available on YouTube - so take a few moments and look at some of those as well.
The file I used for this book was created by Fiona Sewell, who graciously shared her design with me. It was created in Design Studio, using the Plantin Schoolbook cartridge. I have gotten her permission to share this file with all of you, and it is available on my 4Shared account here (http://www.4shared.com/file/244573525/3ed914d4/WB_FRIENDS_-PS_-CRAFTBUGMUM.html).
I use a thinner chipboard, which cuts nicely with my Cricut Expression, and a really sticky mat, so the chipboard doesn't move during the cuts. I use multi-cut 2 or 3, depending on the intricacy of the cut.
The first cuts I do are the chipboard - so go thru ALL the letter pages once in chipboard. Then, I do the paper topping/backing for each letter. I like to use double sided paper for my letters - because I know that the front and back will coordinate nicely. This way, I can cut the letter once on the page, then take out my mat, rotate it 180 degrees, and put it in for the second letter. By doing this, I don't have to worry about 'flipping' my paper upside down to get the backing letter to cut right on the patterned paper. So - if you don't use double sided paper - remember to flip your paper upside down to cut the backing part of the letter. Finally, I use a solid paper to cut the individual letters, so that the letters stand out on top of the patterned paper.
Some people like to 'ink' the edges of the book so that the chipboard doesn't look 'unfinished'. This is a personal decision...not just if you want to ink, but also when to ink. For some books, I ink before I adhere my paper - so that the patterns of the paper are not distressed. For this book, I inked AFTER I adhered the paper - which distresses the paper a bit, and gives it a pretty, finished look.
Once everything is cut, it's time to start adhering the book together. My favorite adhesive for this job is Zip Dry! It doesn't dry too fast, so you have time to adjust the paper on the chipboard perfectly. It does not bubble, and dries clear, so even if you get some oozing out, it doesn't show up! The solid letters can be adhered with Zip Dry, or any other adhesive, like the Glue Glider Pro. For this book, I distressed the solid letters ever so slightly, to match with the other distressing done on the edges, and the pattered papers.
Since this is a gift, we didn't have the pictures that will be added to the book, so we just added some journaling boxes and embellishments randomly thru the book. That way, the recipient can add pictures wherever they would like, and there are already decorative touches added, to dress the book up.
I used my Crop-a-Dile II to punch the holes in each page, and used O-rings to bind the book. I could have used my Bind-It-All, but this was a gift for a teenage girl, and I wasn't sure how thick the book would end up, so O-rings were safer! My daughter decorated the O-rings with pretty ribbons, just to give the rings a little flair.
So - don't be afraid - go ahead and try it. If you're nervous about the 'flipping' of letters, try it out first on paper that you don't like - everyone has some of that in their stash! Practice a few times, to make sure you get the concepts...then you can go ahead and do the real thing with prettier paper!
Good luck & happy scrapping!
The following items can be purchased from Cutters Creek:
Plantin Schoolbook Cartridge
Design Studio
Zip Dry Adhesive
The file I used for this book was created by Fiona Sewell, who graciously shared her design with me. It was created in Design Studio, using the Plantin Schoolbook cartridge. I have gotten her permission to share this file with all of you, and it is available on my 4Shared account here (http://www.4shared.com/file/244573525/3ed914d4/WB_FRIENDS_-PS_-CRAFTBUGMUM.html).
I use a thinner chipboard, which cuts nicely with my Cricut Expression, and a really sticky mat, so the chipboard doesn't move during the cuts. I use multi-cut 2 or 3, depending on the intricacy of the cut.
The first cuts I do are the chipboard - so go thru ALL the letter pages once in chipboard. Then, I do the paper topping/backing for each letter. I like to use double sided paper for my letters - because I know that the front and back will coordinate nicely. This way, I can cut the letter once on the page, then take out my mat, rotate it 180 degrees, and put it in for the second letter. By doing this, I don't have to worry about 'flipping' my paper upside down to get the backing letter to cut right on the patterned paper. So - if you don't use double sided paper - remember to flip your paper upside down to cut the backing part of the letter. Finally, I use a solid paper to cut the individual letters, so that the letters stand out on top of the patterned paper.
Some people like to 'ink' the edges of the book so that the chipboard doesn't look 'unfinished'. This is a personal decision...not just if you want to ink, but also when to ink. For some books, I ink before I adhere my paper - so that the patterns of the paper are not distressed. For this book, I inked AFTER I adhered the paper - which distresses the paper a bit, and gives it a pretty, finished look.
Once everything is cut, it's time to start adhering the book together. My favorite adhesive for this job is Zip Dry! It doesn't dry too fast, so you have time to adjust the paper on the chipboard perfectly. It does not bubble, and dries clear, so even if you get some oozing out, it doesn't show up! The solid letters can be adhered with Zip Dry, or any other adhesive, like the Glue Glider Pro. For this book, I distressed the solid letters ever so slightly, to match with the other distressing done on the edges, and the pattered papers.
Since this is a gift, we didn't have the pictures that will be added to the book, so we just added some journaling boxes and embellishments randomly thru the book. That way, the recipient can add pictures wherever they would like, and there are already decorative touches added, to dress the book up.
I used my Crop-a-Dile II to punch the holes in each page, and used O-rings to bind the book. I could have used my Bind-It-All, but this was a gift for a teenage girl, and I wasn't sure how thick the book would end up, so O-rings were safer! My daughter decorated the O-rings with pretty ribbons, just to give the rings a little flair.
So - don't be afraid - go ahead and try it. If you're nervous about the 'flipping' of letters, try it out first on paper that you don't like - everyone has some of that in their stash! Practice a few times, to make sure you get the concepts...then you can go ahead and do the real thing with prettier paper!
Good luck & happy scrapping!
The following items can be purchased from Cutters Creek:
Plantin Schoolbook Cartridge
Design Studio
Zip Dry Adhesive
Posts
Just a quick note to let you know that a link to this post will be placed on CraftCrave.com in the Cutting category today [21 Mar 09:19am GMT]. Thanks, Maria
ReplyDeleteLove your FRIENDS book Vicki -- beautiful!
ReplyDeleteGreat book & I love the simple tutorial on cutting the paper.
ReplyDeleteThanks for the tutorial. She's going to love it.
ReplyDelete